Engineered and manufactured in India, Bollard Court is a PUR-coated sport vinyl floor engineered for play — shock absorption and controlled ball rebound underfoot, with a hard-wearing surface that stands up to daily use and cleans easily. Available in 4.5 mm and 7 mm thicknesses across 17 solid colours and wood finishes.
Solid colour range
4.5 mm thickness in 1.8 × 20 mtr. rolls — 36 sq.mtr. / 387.5 sft per roll.
4.5 mm build-up
Eight engineered layers, from the PUR surface coating down to a calcium-free foam backing.
- PUR (UV) coating
- 100% PVC wear layer
- Reinforced layer
- Glass fibre stable layer
- Grid stable layer
- Decompression layer
- 100% PVC two-colour closed cell
- Foam layer (calcium free)
Wood finish range
4.5 mm thickness in 1.8 × 20 mtr. rolls — 36 sq.mtr. / 387.5 sft per roll.
7 mm range
7 mm thickness in 1.8 × 15 mtr. rolls — 27 sq.mtr. / 290.62 sft per roll, with higher shock absorption and ball rebound.
Shades shown are indicative; actual samples may vary slightly.
Test data
| Technical characteristics | Test method | 4.5 mm | 7.0 mm |
|---|---|---|---|
| Construction | |||
| Total weight | — | 3.3 kg | 4.6 kg |
| Surface protection | — | PUR | PUR |
| Width of roll | — | 1.8 mtr | 1.8 mtr |
| Length of roll | — | 15 / 20 mtr | 15 mtr |
| Thickness of wear layer | — | 0.50 mm | 1.20 mm |
| Thickness | — | 4.5 mm | 7.0 mm |
| Technical performance | |||
| Dimensional stability | EN 434 | <0.156 | <0.206 |
| Indentation resistance | EN 1516 / EN 433 | <0.40 | — |
| Flexibility low temperature | EN 435 | Pass | Pass |
| Abrasion resistance | EN 1505470-1 / EN 660 | Pass | Pass |
| Propagation fire | EN 14904 | B1 | B1 |
| Shock absorption | EN 14808 | 25% | 30% |
| Vertical ball rebound | EN 12235 | 95% | 97% |
| Resistance to impact | EN 1517 | 9 | 10 |
| Hygiene clean room test | |||
| Colour fastness to day light | ISO 105B02 | Pass | Pass |
| Slip resistance | DIN 51130 | R-10 | R-10 |
| Castor chair continuous use | EN 425 | Suitable | Suitable |
| Resistance to chemicals | EN 423 | No change | No change |
| Sound absorption | ISO 140 / EN 717 | 18 db | 25 db |
| Friction coefficient | EN 13036-4 | 98 | 98 |
| Wear resistance | — | T | T |
Installation & maintenance
Rolls are suitable for laying on any surface such as concrete, steel or wooden floor, provided the sub-floor is even, hard and dry. Damp floors should be dried before laying begins. The base floor must be thoroughly clean, dry and free from grease and grit.
To remove stubborn stains, rub the affected area immediately with a soft coir brush or fine steel wool soaked in a warm soap solution. Use door coir or suitable mats to minimise the accumulation of dust on the floor.
Do not use strong detergent, harsh cleaning agents or dry steel wool. Avoid throwing lighted cigarette butts or match sticks on the floor. Do not drag heavy objects or furniture across the flooring, to avoid scratches.